We will demonstrate how to assemble our Valve Stem Caps and Stay-Put Lanyards while emphasizing helpful qualities and providing application-specific information.
Some Related Products:
1. A SMALL LESSON IN VALVE STEMS
Depending on the vehicle and application, the majority of valve stems, TPMS or normal, are constructed of either aluminum or brass. Therefore, utilizing a valve stem cap that is entirely comprised of metal increases the possibility of a seizure due to corrosion and/or electrolysis. As a result, if you suddenly need to fill your tire with air, this could block access to the valve, leaving you stuck and facing a hefty repair fee. For example, if the TPMS valves on a BMW need to be replaced due to a seized cap, each valve costs $100.00.
2. STEM CAPS FOR ECONOMIC ABS VALVES
Our Tire Valve Caps are made of 100% ABS plastic and are made to improve the aesthetics of your wheels without affecting wheel balance or tire pressure monitoring systems (TPMS).
For maximum compatibility with an alloy valve stem, each cap is made of exterior-grade ABS plastic and finished in your choice of Chrome, Satin Silver, or Black.
To ensure there will be no interaction with the plating, threads are laser cleaned.
The same crystal clear, UV fade- and scratch-resistant protective coating used on all of our OEM products are applied to the precisely printed design.
The valve orifice is kept clean thanks to an inner O-ring seal, and the knurled head design makes it simple to turn on and off without a tool.
3. ALLOY PREMIUM VALVE STEM CAPS
Our brand-new alloy valve stem caps are the only option if you're searching for the best valve stem cap currently available. With an interior ABS thread shield, our innovative design offers the quality of a German-made precision-machined aluminum cap. The threads on the valve stem are protected from contact with the outside aluminum construction by this combination.
Our exquisitely crafted genuine carbon fiber cap embellishments are CNC routers cut from stunning carbon fiber sheet stock, making them the ideal match for our carbon fiber frames and a fantastic way to put the finishing touch to your new wheels and tires. The carbon fiber weave is enhanced and shielded from deterioration and fading by clear UV-resistant polyurethane doming.
- Tooling grade anodization, semi-gloss black, or bright satin are the finishes available for each cap.
- unique inert ABS insert and premium alloy cap body.
- With a weight of under 2.5 grams each, the small objects won't alter the balance of the wheels or obstruct RFID signals.
- The inner O-ring seal helps keep the valve office tidy, and the knurled head design makes it simple to put on and take off without a wrench.
4. STAY-PUT VALVE STEM CAP LANYARDS
Compatible with any valve stem cap produced by Camisasca for retail or OEM distribution programs.
- Extreme heat, cold, UV, water, tire cleaning chemicals, abrasion, and general environmental conditions prevalent on roads are all withstood by Teflon construction.
- has a sturdy Viton hold-tight O-ring that facilitates rotation while helping to secure the lanyard to the cap body.
- 4 sets per sale.
INSTALLATION:
Step 1: REMOVE THE STEM CAPS FROM YOUR CURRENT VALVES
Turn the four-valve stem covers counterclockwise by hand to release them.
Place caps in a safe place for storage.
Step 2: CONNECT THE VALVE STEM CAP LANYARD
Slide the large side of the Valve Stem Cap Lanyard onto the body of each cap, then fasten it with the O-ring to secure it.
In order to pass the threads on the valve stem, push the lanyard's smaller open ring down.
Step 3: FINAL TOUCH AND ADJUSTMENTS
By hand, clockwise turn each of the four valve stem caps onto the valve.
Take a picture, send it to [email protected], and it might be used in a future campaign!
The printing industry's leader is Yuyao Zhiduo. We offer a variety of supplies so that our clients can create printed goods of the highest caliber. HUIDA values its employees and takes pride in their work in a lucrative field. Contact Us right away for further details on the print industry.